Type:
A two-pack motar base on special Epoxy resin, hardenner Polyamide and graded quartz sands.
Used:
Haveyequipment facilities,chamical plants, electronic plant.GMP pharmacies,garages and warehouse.
Characteristics:
- Excellent adhesion in the concrete ,no cracking and peeling.
- Excellent mechanical strength.
- Unaffected by cold and hot temperature difference.
Technical data
- Color:Clear,desired clors.
- Density(kg/l): Above 1.1 kg/l
- Viscocity at 25oC C1000-2000ps
- Non-volatile content:Above 95%↑by weight(mixture).
- Dry time (at 25oC):Touch dry 2hrs,dry hard 18 hrs full dry 7 days.
- Mixture ratio:base:hardenner:sand=2:1:15 (by weight).
- Pot life:15 min (minture at 25oC).
- Compressive strength :110 N/mm2 (JIS K6911).
- Adhesion :>1.5 N/mm2
- Thinner:Only clearing tools.
Application method:
Special tools.
Note:
- Mix base with hardenner according to mixing ratio and stir thoroughly.
- Adhered moisture,grease,diry ,rustand corrosive salts on subtrate must be cleaned thoroughly.
- Avoid applying the paint in rainy weather or humidty above 85%RH, particurlarly , a west surface must be thoroughly dried.
- All equiqments must be cleaned immediately after used.
- Start applies after the surface of concrete wall or concrete products dry thoroughly .
- When overcoating interval is exceeded,paint surface must roughened to insure adhension.
- Environment construction must be airy,keep away frie.When rolling pait must to wear safety glass,instruments of labor protection.
