Used: Topcoat for cement products, chemical plant, power plant, food factory, lab and hospital…
Technical data
- Color: color list.
- Density(kg/l): 1.1-1.2kg/l
- Viscocity at 25oC 70-80KU.
- Non-volatile content: Above 56↑by weight(mixture).
- Covergare : 10m2/l
- Wet film thickness 85µ,dry film thickness 45µ.
- Dry time (at 25oC): Touch dry 2hrs,dry hard 10 hrs full dry 7 days.
- The mixing ratio is: the main substance to close the insect = 5:1 (by weight).
- Pot life: 4hrs (minture at 25oC).
- Thinner: 5-10%.
Physical properties:
- Hardness: H
- Abrasion test(g): 0.5
- Impact (Φ12.5mmx500gx50cm): >50cm
Chemical properties: (full dry after 7 days)
- Acid resistent(H2SO4) 5%: No change
- Acid resistent(HNO3) 5%: No change
- Acid resistent(CH3COOH) 5%: Yellowish
- Acid resistent(HCL) 5%: No change
- Alkaly resistent(NaOH) 30% No change
- Salt resistent(NaCl) 5% No change.
- Gasoline: Nochange
- Motor oil : No change.
- Organic solvent(Xylene): No change
Application method: Roller or brush airless spray
Note:
- Mix base with hardenner according to mixing ratio and stir thoroughly.
- Adhered moisture,grease,diry ,rustand corrosive salts on subtrate must be cleaned thoroughly.
- Avoid applying the paint in rainy weather or humidty above 85%RH,particurlarly,a west surface must be thoroughly dried.
- All equiqments must be cleaned immediately after used.
- Start applies after the surface of concrete wall or concrete products dry thoroughly .
- When overcoating interval is exceeded,paint surface must roughened to insure adhension.
- Environment construction must be airy,keep away frie.When rolling pait must to wear safety glass,instruments of labor protection.
Package: 20kg/set
