SB 715 (self-leveling coatings)

Used:Topcoat for cement products,chemical plant,power plant,food factory,lab and hospital…

Characteristics:Excellent self-liverling,hight build coating without pinhole,500-1500µ pre coat.

Technical data

  • Color:color list.

  • Density(kg/l):1.45-1.50kg/l

  • Viscocity at 25oC 3500-6000cps

  • Non-volatile content:Above 95%↑by weight(mixture).

  • Covergare:1kg/1m2(1000µ pre coat)

  • Wet film thickness500µ,dry film thickness 475µ.

  • Dry time (at 25oC):Touch dry 6hrs,dry hard 18 hrs full dry 7 days.

  • Mixture ratio:base:hardenner=4:1(by weight).

  • Pot life:45 min (minture at 25oC).

  • Thinner:Only clearing tools.

Physical properties:

  • Hardness:H

  • Abrasion test(g):0.5

  • Impact (Φ12.5mmx500gx50cm):>50cm

Chemical properties:(Laboatory tests ,full dry after 7 days)

  • Acid resistent(H2SO4) 5%: No change

  • Acid resistent(HNO3) 5%: No change

  • Acid resistent(CH3COOH) 5%: Yellowish

  • Acid resistent(HCL) 5%: No change

  • Alkaly resistent(NaOH) 5% No change

  • Salt resistent(NaCl) 5% No change.

  • Gasoline:Nochange

  • Motor oil :No change.

  • Organic solvent(Xylene):No change

Application method:Special tools.


  • Mix base with hardenner according to mixing ratio and stir thoroughly.

  • Adhered moisture,grease,diry ,rustand corrosive salts on subtrate must be cleaned thoroughly.

  • Avoid applying the paint in rainy weather or humidty above 85%RH, particurlarly , a west surface must be thoroughly dried.

  • All equiqments must be cleaned immediately after used.

  • Start applies after the surface of concrete wall or concrete products dry thoroughly .

  • When overcoating interval is exceeded,paint surface must roughened to insure adhension.

  • Environment construction must be airy,keep away frie.When rolling pait must to wear safety glass,instruments of labor protection.

Package:Base 19 kg/dr,hardenner 4.75 kg/can.

< Go back

Related information