Used:Topcoat for cement products,chemical plant,power plant,food factory,lab, hospital,showroom floors….
Technical data
- Color:color list.
- Density(kg/l):1.1-1.2kg/l
- Viscocity at 25oC 70-80KU.
- Non-volatile content:Above 56↑by weight(mixture).
- Covergare :10m2/l
- Wet film thickness 85µ,dry film thickness 45µ.
- Dry time (at 25oC):Touch dry 2hrs,dry hard 10 hrs full dry 7 days.
- Mixture ratio:base:hardenner=4:1 (by weight).
- Pot life:4hrs (minture at 25oC).
- Thinner:5-10%.(SUN-BOW Thinner PU36).
Physical properties:,
- Hardness:H
- Abrasion test(g):95 mg@500cycle.
- Adhesion (TCVN 2097:1993): 2 piont
- Flexural Stregth 2mm
- Impact (Φ12.5mmx500gx50cm):>50cm
Application method:Roller or brush airless spray
Note:
- Mix base with hardenner according to mixing ratio and stir thoroughly.
- Adhered moisture,grease,diry ,rustand corrosive salts on subtrate must be cleaned thoroughly.
- Avoid applying the paint in rainy weather or humidty above 85%RH,particurlarly,a west surface must be thoroughly dried.
- All equiqments must be cleaned immediately after used.
- Start applies after the surface of concrete wall or concrete products dry thoroughly .
- When overcoating interval is exceeded,paint surface must roughened to insure adhension.
- Environment construction must be airy,keep away frie.When rolling pait must to wear safety glass,instruments of labor protection.
Package:18kg/set(Base 15kg/dr,hardenner 3 kg/can).
