Coating SB 714

Used: Topcoat for cement products, chemical plant, power plant, food factory, lab and hospital…

Technical data

  • Color: color list.
  • Density(kg/l): 1.1-1.2kg/l
  • Viscocity at 25oC 70-80KU.
  • Non-volatile content: Above 56↑by weight(mixture).
  • Covergare : 10m2/l
  • Wet film thickness 85µ,dry film thickness 45µ.
  • Dry time (at 25oC): Touch dry 2hrs,dry hard 10 hrs full dry 7 days.
  • Mixture ratio:base: hardenner=8.6:1 (by weight).
  • Pot life: 4hrs (minture at 25oC).
  • Thinner: 5-10%.

Physical properties:

  • Hardness: H
  • Abrasion test(g): 0.5
  • Impact (Φ12.5mmx500gx50cm): >50cm

Chemical properties: (full dry after 7 days)

  • Acid resistent(H2SO4) 5%: No change
  • Acid resistent(HNO3) 5%: No change
  • Acid resistent(CH3COOH) 5%: Yellowish
  • Acid resistent(HCL) 5%: No change
  • Alkaly resistent(NaOH) 30% No change
  • Salt resistent(NaCl) 5% No change.
  • Gasoline: Nochange
  • Motor oil : No change.
  • Organic solvent(Xylene): No change

Application method: Roller or brush airless spray


  • Mix base with hardenner according to mixing ratio and stir thoroughly.
  • Adhered moisture,grease,diry ,rustand corrosive salts on subtrate must be cleaned thoroughly.
  • Avoid applying the paint in rainy weather or humidty above 85%RH,particurlarly,a west surface must be thoroughly dried.
  • All equiqments must be cleaned immediately after used.
  • Start applies after the surface of concrete wall or concrete products dry thoroughly .
  • When overcoating interval is exceeded,paint surface must roughened to insure adhension.
  • Environment construction must be airy,keep away frie.When rolling pait must to wear safety glass,instruments of labor protection.

Package: Base 21.5kg/dr,hardenner 2.5kg/can.

< Go back

Related information